Adding layouts to a sheet set

To add layouts of vault drawings to an existing sheet set:

1. Open the sheet set in AutoCAD. At least one drawing must also be open. If necessary, open or create a drawing to enable the Import Layout as Sheet command in Sheet Set Manager.
2. In Sheet Set Manager, click the Sheet List tab to display the Sheets list.
3. Right-click the name of the sheet set in the Sheets list and select Import Layout as Sheet. The Import Layouts as Sheets dialog box appears.
4. Click Browse for Drawings. The Select Drawings dialog box appears.
5. Click the Browse the TeamWork Vault button in the toolbar. The ‘Select Drawing’ from TeamWork dialog box appears.
6. Browse the vault, select a drawing that contains a layout that you want to import, and click Open. The name of the drawing, the names of the layouts found, and the status of the layouts are added to the layouts list. Select the layouts that you want to import.
7. Repeat steps 4 through 7 for each drawing containing layouts that you want to import. Click Import Checked when finished. The layouts are added to the Sheets list.

When the sheet set is saved, TeamWork references are created between the sheet set document and each drawing for which layouts were imported to the sheet set.