Configuring the AutoCAD rendering module options

You are here: About rendering profiles > Creating and editing a rendering profile > Configuring the AutoCAD rendering module options

Configuring the AutoCAD rendering module options

The AutoCAD rendering options specify which drawing layouts to render and to which format in the destination system.

Notes

The AutoCAD SDI (single document interface) system variable must be set to 0 for use with this rendering module or else rendering could fail and result in ARX cannot load errors in the event log.
If AutoCAD drawings (particularly legacy drawings) that contain AEC objects will be rendered, set the AutoCAD AECFILEOPENMESSAGE system variable to 0. This will prevent dialog boxes from appearing when the drawings load that suspend rendering. The text of the dialog boxes is Saving the drawing will update any AEC object in it to the current version, which will be incompatible with earlier versions.
Autodesk Infocenter must be disabled by setting the InfoCenterOn value of the following register key to 0:

HKEY_CURRENT_USER\Software\Autodesk\AutoCAD\RXX.X\ACAD-XXXX:XXX\InfoCenter

Where the Xs represent the release number and application code for the installed version of AutoCAD. This prevents the InfoCenter process (WSCommCntr4.exe) from starting and consuming processor resources.
Add the Meridian Enterprise Server program folder (by default, C:\Program Files\BC-Meridian Enterprise Server) to the TRUSTEDPATHS system variable in AutoCAD by clicking Tools>Options>Files>Trusted Location.

Tip For an example of configuring this module to render Navisworks models to NWD format, see Rendering Navisworks models.

To configure the AutoCAD rendering module options:

In Meridian Enterprise Server Administration Console, in the Data Exchange group, click Rendering Profiles. The All Rendering Profiles page appears and lists the existing profiles grouped by the name of the computer (cluster node) to which they are assigned.
Double-click the rendering profile that you want to configure. The AutoCAD rendering options page appears.
Click options or type values using the descriptions in the following table.

AutoCAD rendering module options
Option	Description
General group
Name	The name of the rendering profile as seen in the Administration Console.
Computer	The name of the Meridian Enterprise Server cluster node on which to run this job.
Input extensions	The quantity of source file extensions to be rendered by this module. To select extensions: Click Configure. The INPUT EXTENSIONS dialog box appears and lists the supported file extensions. Select the file extensions that you want to be rendered. Click OK. The quantity is refreshed to reflect your selections.
AutoCAD version	If the computer has multiple AutoCAD installations on it, select the one that you want to be used with this rendering profile.
Output group
Rendering command	Select a command to use for rendering: PLOT– Renders drawings with AutoCAD plotter configuration files using the options that are set in the Plotter and Plot options groups. AutoLISP command – Shows options with which you can configure an AutoLISP function that you have created for plotting.
Export group
Export	Select the layout to render. For the Layout option, type the layout tab number. The Use view from rendering profile option of the job options uses the value retrieved from a source document property. The property name is specified in the From view option of the publishing job as described in Configuring rendering options.
Plotter group
Plot configuration	Type the name of a plotter configuration file to use for rendering. Note For successful rendering, the file must be fully configured and operational without Publisher before it is used with Publisher.
Output file format	Select the desired output format.
Use all values from layout	If enabled, the options in the Plot options group are retrieved from the selected layout. If cleared, the options are available and can be configured.
Plot options group
Media size from advanced rendering setting	Uses the value retrieved from a source document property. The property name is specified in the Page size option of the publishing job as described in Configuring rendering options.
Default page size	Select a media name from AutoCAD to be used as the default (for example, if the page size retrieved from the source document property cannot be matched with an AutoCAD media name).
Plot style	Select a source for the plot style to use for rendering. The Use job advanced rendering settings option uses the value retrieved from a source document property. The property name is specified in the Pen style option of the publishing job as described in Configuring rendering options.
Skip incompatible drawings	If selected, generates an error if the selected plot style cannot be applied. Otherwise, if an incompatible value is used then the plot style is taken from the layout. If the plot style from the layout is not present on the Meridian Enterprise Server computer, then no plot style is used.
Use values from layout	If enabled, the remainder of the options in the dialog box are derived from the layout to be rendered. Otherwise, the options are available and can be configured.
Plot area	Select an option from the list to specify the area to render. The available options correspond to those saved in the drawing.
Center plot	Centers the output within the selected media.
Scale	Select a scale at which to render the output. Only available if Fit to page is cleared.
Fit to page	Scales the selected plot area to fit the selected media.
Orientation	Select an option from the list to specify the orientation of the selected plot area within the selected media. The Use job advanced rendering settings option uses the value retrieved from a source document property. The property name is specified in the Page orientation option of the publishing job as described in Configuring rendering options.
Units	Unit of measurement to scale the drawing to the media.
Use line weights	Renders line weights in the output.
Scale line weights	Adjusts the line weights relative to the value selected for the Scale option.
AutoLISP command group
Command	Type the name of an AutoLISP function to plot the source drawing. For help creating the AutoLISP function, see Configuring an AutoLISP plotting command.
Output extension	Type the extension of the output file to be created. It should be the extension that is normally generated by the plotter that is specified in the plotter configuration file that is used by the function. By default, the name the output file will be the name of the drawing being plotted.
Use job advanced rendering settings	Uses the value retrieved from a source document property. The property name is specified in the AutoLISP option of the publishing job as described in Configuring rendering options.

In the app bar, click SAVE.

Related concepts

Understanding the AutoCAD rendering module

Related information

Rendering Navisworks models